兔子先生

Skip to Main Content
Reza Abrishambaf
Associate Professor,
Coordinator of EMET Program
Engineering Technology

Reza Abrishambaf

Contact Info

513-785-3033 513-785-1823 (Fax)
207D Phelps Hall, Hamilton Campus 1601 University Blvd, Hamilton, OH 45011

Education

  • Ph.D., Electrical and Electronic Engineering, Eastern Mediterranean University, Famagusta, North Cyprus, 2012
  • M.S., Electrical and Electronic Engineering, Eastern Mediterranean University, Famagusta, North Cyprus, 2007
  • B.S., Electronic Engineering, Najaf Abad Azad University, Isfahan, Iran, 2005

Academic and Professional Experience

  • Associate Professor, 兔子先生 University, Hamilton Campus, July 2021-present
  • Assistant Professor, 兔子先生 University, Hamilton Campus, August 2016-June 2020
  • Visiting Assistant Professor, 兔子先生 University, Hamilton Campus, Aug 2015-Aug 2016
  • Invited Assistant Professor, University of Minho, Portugal. 2014-2015
  • Research Assistant, Bosch Multimedia Car, Portugal 2014-2015
  • Postdoctoral Researcher, Centro Algoritmi, University of Minho, Portugal 2012-2014
  • Instructor, Dep. Of Electrical & Electronic Eng., Eastern Mediterranean University, North Cyprus, 2010-2012
  • Teaching Assistant, Dep. Of Electrical & Electronic Eng., Eastern Mediterranean University, North Cyprus, 2006-2010

Research Interests

  • Wireless Sensor Networks
  • Distributed Control Systems based on IEC 61499 Function Blocks
  • IEEE 1451 Smart Transducers
  • Industrial Internet-of-Things (IIoT)

Publications

Journals

  • Da Rocha, Helbert, João Pereira, Reza Abrishambaf, and Antonio Espirito Santo. 2022. "An Interoperable Digital Twin with the IEEE 1451 Standards" Sensors 22, no. 19: 7590. https://doi.org/10.3390/s22197590, 2022.
  • Da Rocha, Helbert, Reza Abrishambaf, João Pereira, and Antonio Espirito Santo. 2022. "Integrating the IEEE 1451 and IEC 61499 Standards with the Industrial Internet Reference Architecture" Sensors 22, no. 4: 1495. https://doi.org/10.3390/s22041495. 2022.
  • Duarte Fernandes, André G. Ferreira, Reza Abrishambaf, José Mendes, Jorge Cabral, “A machine learning-based dynamic link power control in wearable sensing devices”, Wireless Networks Journal, Springer, DOI: 10.1007/s11276-020-02539-1, 2021.
  • K. Almiani, A. Viglas, Y. Lee, R. Abrishambaf, “Peripheral nodes and their effect in path planning in networks”, International Journal of Ad Hoc and Ubiquitous Computing, Vol. 27, No. 3, 2018.
  • D. Fernandes, A. G. Ferreira, R. Abrishambaf, J. Mendes and J. Cabral, "Survey and Taxonomy of Transmissions Power Control Mechanisms for Wireless Body Area Networks," in IEEE Communications Surveys & Tutorials, vol. 20, no. 2, pp. 1292-1328, 2017.
  • D. Fernandes, A. G. Ferreira, R. Abrishambaf, J. Mendes and J. Cabral, "A Low Traffic Overhead Transmission Power Control for Wireless Body Area Networks," in IEEE Sensors Journal, vol. PP, no. 99, pp. 1-1., 2017.
  • S.Khellat-Kihel, R. Abrishambaf, J.L. Monteiro, M.Benyettou, “Multimodal Fusion of the Finger vein, Fingerprint and the Finger-Knuckle-Print Using Kernel Fisher Analysis”, Journal of Applied Soft Computing, Volume 42, May 2016, Pages 439–447, 2016.
  • K. Almiani, A. Viglas, F. Schalekamp, R. Abrishambaf, “Flow-Based Scheme for Time-Constrained Data Gathering in Wireless Sensor Networks”, International Journal of Wireless and Mobile Computing, Vol. 10, No.1, 2016
  • R. Abrishambaf, A. Akbari, M. Hashemipour, “Comparison of Wireless Sensor Network and RFID for the Process Control of Distributed Industrial Systems”, Journal of Systems and Control Engineering, Proceeding of Institute of Mechanical Engineers, DOI: 10.1177/0959651813517499, January 2014
  • R. Abrishambaf, M, Hashemipour, M. Bal, “Structural Modeling of Industrial Wireless Sensors and Actuators Networks for Mechatronic Systems”, International Journal of Advanced Manufacturing Technology, Springer, vol. 64, pp. 793-811, February 2013
  • R. Abrishambaf, Suha N. Bayindir, M. Hashemipour, "Energy Analysis of Routing Protocols in Wireless Sensor Networks for Industrial Applications ", Journal of Systems and Control Engineering, Proceeding of Institute of Mechanical Engineers (IMechE), No. 225, vol. 5, pp. 678-684, May 2012
  • R. Abrishambaf, M. Bal. M. Hashemipour, " Distributed Control Architecture for Wireless Sensor Networks Using IEC 61499 Function Blocks for Industrial Automation", International Journal of Computer and Electrical Engineering (IJCEE), an IACSIT Publication, Vol. 3, No. 5, pp. 640-644, October 2011

Conferences

  • E. Westbay, I. Storey, F. Nkrumah Jr, M. Bal and R. Abrishambaf, “Design of an Autonomous Shop Floor Robot (GOFR) with ROS”, 2023 ASEE Conference for Industry and Education Collaboration, Collaborate, Communicate, and Innovate Engineering Education, Charleston, SC., February 2023.
  • M. Bal, R. Abrishambaf, “Real-Time Interactive Virtual Reality Simulation System to Enhance Remote Delivery of Laboratory Courses in Engineering Technology”, 2023 ASEE Conference for Industry and Education Collaboration, Collaborate, Communicate, and Innovate Engineering Education, Charleston, SC., February 2023.
  • H. Da Rocha, A. Espírito-Santo and R. Abrishambaf, "Semantic Level of Interoperability by Proposing an IEEE 1451 Family of Standards Ontology," IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, Brussels, Belgium, pp. 1-6, 2022.
  • R. Abrishambaf, H. Da Rocha and A. Espírito-Santo, "IEC 61499 and IEEE 1451 for Distributed Control and Measurement Systems," IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, Toronto, ON, Canada, pp. 1-6, 2021.
  • H. da Rocha, A. Espirito-Santo, R. Abrishambaf, “Semantic Interoperability in the Industry 4.0 Using the IEEE 1451 Standard”, 46th Annual Conference of the IEEE Industrial Electronics Society (IES), IECON, pp. 5243-5248, Singapore, 2020.
  • R. Abrishambaf, " Structural Modeling and Implementation of Smart Sensor and Actuator Networks using IEEE 1451" The IEEE I2MTC – International Instrumentation and Measurement Technology Conference, pp. 1-5, doi: 10.1109/I2MTC43012.2020.9128393, Dubrovnic, Croatia, 2020.
  • B. Seyed-Aghazadeh, H. Samandari, and R. Abrishambaf, “On the Dynamic Response of Flow-Induced Vibration of Nonlinear Structures”, Nonlinear Structures and Systems, 1, 91-94. 2020.
  • H. Gami, R. Abrishambaf, “Design of a Cost-Effective Wireless Sensor Network for Energy and Resource Optimization”, 2019 American Society of Engineering Education, Zone 2 Conference, Niagara Falls, NY, April 11-13, 2019.
  • R. Abrishambaf, G. Matoumbi, T. Sobhanabhiklu, N. Anderson, “An IoT-based Smart Trash Detector based on Wireless Sensor Networks”, 2019 American Society of Engineering Education, Zone 2 Conference, Niagra Falls, NY, April 11-13, 2019.
  • R. Abrishambaf, M. Bal, " A Study on the Optimal Base Station Placement for Connected Smart Factories" IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 5527-5531, 2019.
  • A. Espírito-Santo, R. Abrishambaf, V. Paciello and V. Huang, "The Need for Standardization in Low Power Smart Sensing," IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, D.C., DC, USA, pp. 3870-3875, 2018.
  • J. Lentz, S. Hill, B. Schott, M. Bal and R. Abrishambaf, "Industrial Monitoring and Troubleshooting Based on LoRa Communication Technology," IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, D.C., DC, USA, pp. 3852-3857, 2018.
  • R. Abrishambaf and M. Bal, "Base station positioning for industrial wireless sensor," 2018 IEEE International Conference on Consumer Electronics (ICCE), Las Vegas, NV, pp. 1-4., 2018.
  • Mert Bal, Reza Abrishambaf, “Using WebGL in Developing Interactive Virtual Laboratories for Distance Engineering Education”, 2017 ASEE Annual Conference - American Society for Engineering Education, Columbus, Ohio, June 2017.
  • M. Bal, A. Abatan, R. Abrishambaf, “Performance Evaluation of Non-Metal 3D Printing Techniques for Dimensional Accuracy and Mechanical”, 24th Annual International Conference on Composites or Nano Engineering, Rome Italy, June 2017.
  • R. Abrishambaf, A. Abatan, M. Bal, “IoT-based Critical Infrastructure Monitoring using Wireless Sensor Networks”, 24th Annual International Conference on Composites or Nano Engineering, Rome, Italy, June 2017.
  • R. Abrishambaf, M. Bal, V. Vyatkin, “Distributed Home Automation System Based on IEC61499 Function Blocks and Wireless Sensor Networks”, IEEE International Conference on Industrial Technology (ICIT2017), Toronto, ON, 2017, pp. 1354-1359, 2017.
  • Mert Bal, Reza Abrishambaf, “A System for Monitoring Hand Hygiene Compliance based-on Internet-of-Things”, IEEE International Conference on Industrial Technology (ICIT2017), Toronto, ON, 2017, pp. 1348-1353, 2017.
  • D. Fernandes, T. Gomes, A. Ferreira, R. Abrishambaf, J. Cabral, J. L. Monteiro, A. Rocha, “On-Body Signal Propagation in WBAN for Firefighter’s Personal Protetive Equipment: Statistical Characterization and Performance Assessment”, IEEE International Conference on Industrial Technology (ICIT2017), Toronto, ON, 2017, pp. 1360-1365, 2017.
  • S. Khellat-Kihel, R. Abrishambaf, J. Cabral, J. Monteiro, M. Benyettou, “Finger-Knuckle-Print Recognition Using the Kernel Principal Components Analysis and the Support Vector Machines”, 4th International Symposium on Modelling and Implementation of Complex Systems, Algeria, pp. 177-185, 2016.
  • D. Fernandes, A. Ferreira, S. Branco, R. Abrishambaf, J. Mendes, J. Cabral, H. Carvalho, A. Rocha, “Energy Saving Mechanism for a Smart Wearable System: Monitoring Infants during the Sleep”, 2016 IEEE International Conference on Industrial Technology, pp. 1932-1937, Taipei, 2016.
  • L. Dariz, M. Selvatici, M. Ruggeri, R. Abrishambaf, “Smart and Wearable Wireless Sensors: Scenario Analysis and Communication Issues”, 2016 IEEE International Conference on Industrial Technology, pp. 1938-1943, Taipei, 2016.
  • R. Abrishambaf, J. Cabral, J. Monteiro, M. Bal, “An Energy Aware Design Flow of Distributed Industrial Wireless Sensor and Actuator Networks”, 2015 IEEE International Conference on Industrial Technology (ICIT2015), pp.2166-2171, 17-19 March 2015.
  • J. Brito, N. Cardoso, P. Gonçalves, R. Abrishambaf, J. Pereira, J. Cabral, J. Monteiro, “Energy Analysis of Wireless Sensor Network for Collision Detection on Guardrails”, Brazilian Symposium on Computing Systems Engineering (SBESC 2014).
  • S. Khellat-kihel, R. Abrishambaf, N. Cardoso, J. Monteiro, M. Benyettou, “Finger Vein Recognition Using Gabor Filter and Support Vector Machines”, The IEEE International Image Processing Applications and Systems Conference (IPAS'14), pp.1-6, 5-7 Nov. 2014.
  • J. Miranda, T. Gomes, R. Abrishambaf, F. Loureiro, J. Cabral, A. Tavares, J. Monteiro, " A Wireless Sensor Network for Collision Detection on Guardrails ", 23rd IEEE International Symposium on Industrial Electronics, ISIE2014, pp. 1430-1435 Turkey, 2014
  • J. Miranda, R. Abrishambaf, T. Gomes, P. Gonçalves, J. Cabral, A. Tavares, J. Monteiro, "Path Loss Exponent Analysis in Wireless Sensor Networks: Experimental Evaluation", IEEE 11th International Conference on Industrial Informatics, INDIN13, pp. 54-58, Bochum, Germany, 2013
  • F. Farazandeh, R. Abrishambaf, S. Uysal, T. Gomes, J. Cabral, "A Hybrid Energy-Efficient Routing protocol for Wireless Sensor Networks", IEEE 11th International Conference on Industrial Informatics, INDIN13 pp. 18-23, Bochum, Germany, July 2013
  • P. Ghafarpoor, R. Abrishambaf, M. Hashemipour, “Experimental Analysis of Trilateration Method for Localization of Wireless Sensor Networks in Industrial Environments”11th IEEE International Workshop: Electronics, Control, Measurement, Signals and their application to Mechatronics, France, June 2013
  • M. Arbabi M., R. Abrishambaf, S. Uysal, “Range Free Localization of Wireless Sensor Networks Based on Sugeno Fuzzy Inference”, The Sixth International Conference on Sensor Technologies and Applications, SENSORCOMM, IARIA, pp. 36-41, Rome, Italy, August 2012
  • R. Abrishambaf, M. Bal, M. Hashemipour, "Integration of Wireless Sensor Networks into the Distributed Intelligent Manufacturing within the Framework of IEC 61499 Function Blocks ", 2011 IEEE International Conference on Systems, Man, and Cybernetics (IEEE SMC 2011), pp.3458 - 3462, Anchorage, Alaska, USA, October 2011
  • R. Abrishambaf, M. Bal. M. Hashemipour, "Multi-Agent System Architecture For Intelligent Building Based On Iec 61499 Function Blocks", 10th International Conference on Clean Energy,ICCE 2010, Famagusta, North Cyprus, September 2010
  • R. Abrishambaf, H. Demirel, I. Kale, "A Fully CNN Based Fingerprint Recognition System", 11th IEEE International Workshop on Cellular Neural Networks and their Applications ,pp. 146-149, Santiago de Compostela, Spain, July 2008
  • R. Abrishambaf, H. Demirel, I. Kale, "Establishing the Finite Word-Length Parameters for a CNN based Fingerprint Recognition System", 5th International Conference on Electrical and Computer Systems, EECS'08, Lefke, Northern Cyprus, November 2008